Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Newton?
Panel replacement in Newton typically costs $250 – $500 for a single damaged section, and that estimate usually includes labor. A basic steel bottom panel sits near the low end; a double-wide insulated or carriage-style panel with matching hardware runs toward the top. The written estimate we give you sets the final price, and estimates are free.
Here’s the part most homeowners don’t hear until they call: a lot of “panel replacement” jobs are really a one-panel fix, and knowing which panel and which material your door uses is the difference between a $250 repair and a $500 one. Newton has no shortage of older wood and steel sectional doors from the mid-century housing stock around Waban and Newton Centre, and those often need a closer look before anyone quotes a number.
Key Takeaways
- Typical panel replacement in Newton: $250 – $500, including labor.
- Single bottom panels are the most common replacement; they take the most impact and moisture.
- Material, door width, and panel style move the price more than anything else.
- Same-day and emergency service is available when a damaged panel leaves the door unsafe or stuck.
- Free estimates: call (855) 337-1889.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items typically break down in Newton for 2026. These are estimated ranges for a residential sectional door; the written estimate is what you pay.
| Line item | Typical estimated range |
|---|---|
| Single steel panel replacement (standard) | $250 – $340 |
| Single insulated or double-wide panel | $320 – $500 |
| Full panel replacement (whole door faces) | $250 – $500 per the panel-replacement service range above; larger multi-panel jobs price individually |
| Panel plus bottom seal / weatherstrip | Add to the panel price; quoted together |
| Related repair, if found during service | Spring $180 – $340 (one spring) · Cable $130 – $250 · Track $120 – $240 · Rollers $110 – $220 · Opener $120 – $320 |
What pushes the number up? A specialty color or woodgrain finish that has to be matched to the panels still on the door, a panel that isn’t a stock size, and anything on a double-car door (16-foot) rather than a single (8- or 9-foot). What pulls it down? Replacing a standard bottom panel on a common steel door, especially when the damage is cosmetic and the rest of the door is sound. A dented bottom panel on a Newton door sees more moisture and road grit than any other panel, which is why it fails first and why a straight swap is usually the simplest path.
What Affects Panel Replacement Pricing in Newton
- Panel material and finish. Standard 24- or 25-gauge steel is the cheapest to replace. Insulated steel, aluminum, and wood-look panels cost more because they have to match the look of the panels you’re keeping. If the door is a wood or wood-composite design, expect the price to lean toward the high end of the range.
- Door width. A single-car door (8- or 9-foot) has narrower panels than a 16-foot double door. A double door’s panels are longer and heavier, which adds both material and labor.
- Whether the panel is still in production. Many doors around Newton are Clopay, Amarr, Wayne Dalton, or Raynor models, and those brands often still supply replacement sections. If the exact panel is discontinued, a close-match panel or a wider section replacement may be needed. We service all eight of those brands and can usually tell you before you commit.
- Hidden damage behind the panel. A panel that was hit by a car or a plow often takes a hinge, roller, or track section with it. That’s why we check the whole door during the estimate: the panel might be $250, but a bent track or a cracked hinge is a separate line.
- Age and condition of the surrounding door. A weathered steel door from the 1970s or ’80s may have rust along the panel seams, and a new panel can look mismatched against it. In that case, sometimes a few panels make sense, sometimes it doesn’t, and we’ll tell you which.
- Access and door location. A door tucked against a retaining wall, a low-clearance garage, or a tight Newton driveway can slow the job and add labor. It’s a small factor, but it’s real.
Should You Repair or Replace a Damaged Panel?
Replacing a single panel is almost always cheaper than a full new door. The repair makes sense when the rest of the door is structurally sound, the panel matches (or a close match exists), and the damage is confined to one section. Full replacement starts to make sense when several panels are damaged, the door is rusted through at the seams, or the panel style is discontinued and no good match exists.
If you’re weighing the two, the full panel replacement service covers the swap, and a new door installation runs $700 – $2200 depending on size and material. For most Newton homeowners facing one damaged bottom panel, the repair is the right call. When we give the estimate, we check the springs, cables, rollers, and track too. A damaged panel and a tired spring often show up in the same visit, and it’s better to know the whole picture up front than to find out three weeks later.
How to Save on Panel Replacement
- Get the panel identified before you call. Grab a photo of the inside of the door (the label or manufacturer sticker is usually there) and a photo of the damaged panel. If it’s a Clopay, Amarr, Wayne Dalton, Raynor, or any of the other brands we service, that photo tells us whether the exact section is still available and what it costs before anyone drives out.
- Fix the bottom panel before moisture spreads. A dent or crack in the bottom panel lets water into the door’s seams and the floor track. Handling it early keeps the repair to one panel instead of a section rebuild.
- Combine small repairs in one visit. If the rollers are noisy or a hinge is bent, adding it to the panel job usually costs less than a separate call. The free estimate is the time to raise it.
- Don’t skip the safety check. If a panel is loose, cracked at a hinge point, or the door is off track, call sooner rather than later. A loose panel can drop or bind, and it’s a security gap on a door that’s supposed to close the garage.
Free estimates mean there’s no cost to getting a firm number instead of a guess. Call (855) 337-1889 and we’ll walk through the door with you on the phone first, then book the estimate.
Can You Replace Just One Panel?
Yes. Single-panel replacement is one of the most common jobs we do, and it’s what the $250 – $500 range is built around. The panel is removed, the new section is set into the hinges and rollers, and the door is checked for balance. If the new panel changes the door’s weight even slightly, we adjust the springs or opener travel so the door still closes properly. The whole job usually takes a couple of hours for a standard single panel.
One caveat: on a door that’s been damaged across two or three panels, or a door where the bottom rail is rusted out, a single-panel swap won’t last long. We’ll tell you honestly when a repair makes sense and when it doesn’t. Call (855) 337-1889 for a free estimate on your door.
Why Does Brand Matter for Panel Replacement in Newton?
Because panels aren’t universal. The hinge spacing, panel profile, and color match follow the manufacturer, and the wrong panel won’t sit flush or roll cleanly. Newton homes have a wide spread of brands: Clopay and Amarr are common on newer construction, Wayne Dalton shows up on a lot of 1990s builds, and LiftMaster, Chamberlain, Genie, and Craftsman openers are pretty evenly mixed across the city. We service all eight major brands, which means we’re diagnosing your actual system rather than working around it.
Our technicians have up to 8 years of experience, and the panel and opener work we do is matched to your equipment rather than a generic fix. That’s the practical reason brand matters: a Clopay panel is not going to fit a Wayne Dalton door, and the estimate depends on getting that right the first time.
What About Emergency Panel Damage?
A panel that’s been hit, bent, or partially dislodged can leave the door stuck open or unable to close, and that’s a security problem, not just an inconvenience. Emergency garage door service is a core part of what we offer, not an add-on. If a panel is loose or the door is jammed after a storm, an impact, or a failed hinge, call and we’ll get it into the schedule.
If the door will not close and the garage is exposed, don’t force it. A bent panel under tension can come loose or drop. We’ll get a technician out to assess the door and stabilize it, then quote the panel replacement on the spot. Call (855) 337-1889.
How Do You Choose a Panel Replacement Company in Newton?
Ask three things. First, whether they work on your brand, since a company that only handles one manufacturer will push you toward a workaround. Second, whether the estimate covers the panel and the alignment, because a price for the panel alone can grow once the door is checked. Third, whether they do both repair and full installation, so a panel job that turns into a new door doesn’t send you hunting for a second contractor.
We handle panel replacement, opener repair, spring repair, and full door installation, so the same team covers the whole lifecycle of the door. The Newton Garage Door Repair Pros team works on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. When a door needs more than a panel, we’ll tell you at the estimate, not after the panel’s on the truck.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Newton?
Panel replacement in Newton typically runs $250 – $500 for a single residential section, including labor. A standard steel bottom panel sits at the low end; an insulated, double-wide, or specialized finish panel runs toward the top. The written estimate is the final price. Call (855) 337-1889 for a free quote on your door.
Can you replace just the bottom panel of a garage door?
Yes, and it’s the most common single-panel replacement. A standard bottom panel replacement starts at $250 and can reach $340 for a standard steel section. Bottom panels fail first because they take the most impact and moisture, so this is a routine repair. The door’s balance and opener travel are checked after the swap. Call (855) 337-1889 to book a free estimate.
Is it cheaper to repair a panel or replace the whole door?
Repair is almost always cheaper. A single panel replacement runs $250 – $500, while a full new door installation runs $700 – $2200 depending on size and material. Full replacement makes sense when several panels are damaged, the door is rusted through, or the panel style is discontinued. Call (855) 337-1889 and we’ll tell you which way the numbers actually point for your door.
Can you match the color of an existing panel?
In most cases, yes, starting at the $250 level for a standard color match. If your door is a current model from Clopay, Amarr, Wayne Dalton, or Raynor, the section is usually available in the original finish. On older doors, a close match may be the best available option, and we’ll show you the options before you commit. Call (855) 337-1889 and have a photo of the panel ready.
How long does a panel replacement take?
A standard single-panel replacement typically takes about two hours, and it fits inside the $250 – $340 range for a standard steel section. Larger, insulated, or double-wide panels take longer and price toward $500. If hidden damage turns up, like a bent track ($120 – $240) or a damaged cable ($130 – $250), we’ll quote that before doing the work. Call (855) 337-1889 to schedule your free estimate.
When to Call for a Panel Estimate
A damaged panel that’s left alone tends to get worse: moisture works into the seams, the bottom rail rusts through, and a small fix turns into a larger one. If your door has a dent, crack, or loose panel, call (855) 337-1889 for a free estimate. We’ll tell you what the panel replacement will run, whether the door needs anything else, and whether a repair or a new door is the better path. Same-day and emergency service is available for doors that can’t wait.
Pricing reflects the Newton market as of 2026. Newton Garage Door Repair Pros offers free estimates – call (855) 337-1889.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Katie Thompson"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Robert Bennett"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Kristen Sullivan